Home > Product Information > CataloguesDURAFIDE® PPS > 6150T73 HD9050

HELP

6150T73 HD9050 (ISO)

PRINT
No Word
Counterfeit Products Alert
Item Unit Test Method Special
6150T73
High Impact, Low Gas
Color No. HD9050
ISO Marking Code ISO11469
(JIS K6999)
>PPS-I-(GF+MD)50<
Density g/cm³ ISO 1183 1.71
Water absorption (23°C,24hrs,1mmt) % ISO 62 0.05
Melt viscosity (310℃、1,000/sec) Pa·s ISO 11443 230
Tensile strength MPa ISO 527-1,2 150
Strain at break % ISO 527-1,2 1.8
Flexural strength MPa ISO 178 220
Flexural modulus MPa ISO 178 12,200
Charpy notched impact strength (23℃) kJ/m² ISO 179/1eA 10.5
Temperature of deflection under load (1.8MPa) ISO 75-1,2 270
Coefficient of linear thermal expansion (Normal temperature, Flow direction) x10-5/℃ Our standard 2
Coefficient of linear thermal expansion (Normal temperature, Transverse direction) x10-5/℃ Our standard 4
Electric strength (3mmt) kV/mm IEC 60243-1 17
Volume resistivity Ω·cm IEC 60093 6 x 1015
Volume resistivity (Our standard) Ω·cm -
Relative permittivity (1kHz) IEC 60250 4.5
Relative permittivity (1MHz) IEC 60250 4.4
Dielectric dissipation factor (1kHz) IEC 60250 0.002
Dielectric dissipation factor (1MHz) IEC 60250 0.006
Tracking resistance (CTI) V IEC 60112 150
Arc resistance s ASTM D495 130
Flammability   UL94 V-0
The yellow card File No.     E109088 *2
Appropriate List number of Ministerial Ordinance for Export Trade Control     Item 16 of Appendix -1

If item's description doesn't include test condition, the item is examined at 23 deg. C. (RT)
Details of each property item, test conditions, please see here

*2) Some of the data described on Yellow Card are limited to specific conditions (color, thickness etc.). Please carefully view the detailed descriptions on the Card.

All figures in the table are the typical values of the material and not the minimum values of the material specifications.
All data shown here are not always applicable to parts used under different conditions. We do not guarantee that these data are directly applicable to the application conditions of users and we ask each user to make his own decision on the application.
For safe handling of materials we supply, it is advised to refer to the Material Safety Data Sheet “SDS” of the proper material.
This brochure is edited based on reference literatures, information and data currently available to us. So the contents of this brochure are subject to change without notice due to new data.