Home > Product Information > CataloguesDURANEX® PBT > 733LD ED3002/EF2001


733LD ED3002/EF2001 (ISO)

No Word
Counterfeit Products Alert
Item Unit Test Method Low Warpage, LD Series
GF30% Reinforced, Hydrolysis Resistance
Color No. ED3002/EF2001
ISO Marking Code ISO11469
(JIS K6999)
Density g/cm³ ISO 1183 1.46
Water absorption (23°C,24hrs,1mmt) % ISO 62 0.2
Tensile strength MPa ISO 527-1,2 139
Strain at break % ISO 527-1,2 2.0
Flexural strength MPa ISO 178 180
Flexural modulus MPa ISO 178 9,000
Charpy notched impact strength (23℃) kJ/m² ISO 179/1eA 7.6
Temperature of deflection under load (1.8MPa) ISO 75-1,2 195
Coefficient of linear thermal expansion (23 - 55℃、Flow direction) x10-5/℃ Our standard 2
Coefficient of linear thermal expansion (23 - 55℃、Transverse direction) x10-5/℃ Our standard 7
Electric strength (3mmt) kV/mm IEC 60243-1 26
Volume resistivity Ω·cm IEC 60093 4 x 1016
Tracking resistance (CTI) V IEC 60112 -
Rockwell hardness M(Scale) ISO2039-2 100
Flammability   UL94 HB
The yellow card File No.     E213445 *2
Appropriate List number of Ministerial Ordinance for Export Trade Control     Item 16 of Appendix -1

If item's description doesn't include test condition, the item is examined at 23 deg. C. (RT)
Details of each property item, test conditions, please see here

*2) Some of the data described on Yellow Card are limited to specific conditions (color, thickness etc.). Please carefully view the detailed descriptions on the Card.

Data of detailed properties

Moldability  Flowability  To view the data  
Moldability  Mold Shrinkage  To view the data  
Moldability  Residence in Cylinder  To view the data  
Short-term mechanical properties  Tensile properties  To view the data  
Short-term mechanical properties  Effect of Temperature on Maximum Stress  To view the data  
Endurance  Chemical Resistance, Hot Water Resistance, Heat and Moisture Resistance  To view the data  
Endurance  Heat Resistance  To view the data  
Secondary processing  Adhesive Properties  To view the data  

All figures in the table are the typical values of the material and not the minimum values of the material specifications.
All data shown here are not always applicable to parts used under different conditions. We do not guarantee that these data are directly applicable to the application conditions of users and we ask each user to make his own decision on the application.
For safe handling of materials we supply, it is advised to refer to the Material Safety Data Sheet “SDS” of the proper material.
This brochure is edited based on reference literatures, information and data currently available to us. So the contents of this brochure are subject to change without notice due to new data.