Item		Unit	Test Method	Standard, for SMT
				E471i
				Low Warpage
	Color No.			VF2201/BK210P
	ISO Marking Code		ISO11469 (JIS K6999)	>LCP-(GF+MD)35<
	Density	g/cm³	ISO 1183	1.67
	Water absorption (23°C,24hrs,1mmt)	%	ISO 62	0.03
	Tensile strength	MPa	ASTM D638	140
	Tensile elongation	%	ASTM D638	2.3
	Flexural strength	MPa	ISO 178	195
	Flexural modulus	MPa	ISO 178	13,500
	Flexural strain	%	ISO 178	2.5
	Charpy notched impact strength (23℃)	kJ/m²	ISO 179/1eA	20
	Temperature of deflection under load (1.8MPa)	℃	ISO 75-1,2	265
	Temperature of deflection under load (0.45MPa)	℃	ISO 75-1,2	285
	Electric strength (1mmt)	kV/mm	IEC 60243-1	47
	Electric strength (3mmt)	kV/mm	IEC 60243-1	25
	Volume resistivity	Ω·cm	IEC 60093	2 x 1016
	Volume resistivity (Our standard/1mmt)	Ω·cm		-
	Relative permittivity (1kHz)		IEC 60250	4.3
	Relative permittivity (1MHz)		IEC 60250	3.8
	Dielectric dissipation factor (1kHz)		IEC 60250	0.02
	Dielectric dissipation factor (1MHz)		IEC 60250	0.03
	Tracking resistance (CTI)	V	IEC 60112	150
	Arc resistance	s	ASTM D495	176
	Mold Shrinkage (80×80×1mmt, Flow direction, Inj. pressure 60MPa)	%	Our standard	0.06
	Mold Shrinkage (80×80×1mmt, Transverse direction, Inj. pressure60MPa)	%	Our standard	0.43
	Mold Shrinkage (80×80×1mmt, Flow direction, Inj. pressure79MPa)	%	Our standard	-
	Mold Shrinkage (80×80×1mmt, Transverse direction, Inj pressure 79MPa)	%	Our standard	-
	Rockwell hardness	M(Scale)	ISO2039-2	65
	Flammability		UL94	V-0
	The yellow card File No.			E106764 *2
	Appropriate List number of Ministerial Ordinance for Export Trade Control			Item 16 of Appendix -1

If item's description doesn't include test condition, the item is examined at 23 deg. C. (RT)
Details of each property item, test conditions, please see here

*2) Some of the data described on Yellow Card are limited to specific conditions (color, thickness etc.). Please carefully view the detailed descriptions on the Card.

Data of detailed properties

Moldability	Mold Shrinkage	To view the data
Short-term mechanical properties	Flexural Properties	To view the data
Short-term mechanical properties	Effect of Temperature on Maximum Stress	To view the data
Short-term mechanical properties	Effect of Temperature on Modulus	To view the data

All figures in the table are the typical values of the material and not the minimum values of the material specifications.
All data shown here are not always applicable to parts used under different conditions. We do not guarantee that these data are directly applicable to the application conditions of users and we ask each user to make his own decision on the application.
For safe handling of materials we supply, it is advised to refer to the Material Safety Data Sheet “SDS” of the proper material.
This brochure is edited based on reference literatures, information and data currently available to us. So the contents of this brochure are subject to change without notice due to new data.