Home > Product Information > CataloguesLAPEROS® LCP > E130i VF2201/BK210P/BK205P

HELP

E130i VF2201/BK210P/BK205P (ISO)

PRINT
No Word
Counterfeit Products Alert
Item Unit Test Method Standard, for SMT
E130i
GF Reinforced
Color No. VF2201/BK210P/BK205P
ISO Marking Code ISO11469
(JIS K6999)
>LCP-GF30<
Density g/cm³ ISO 1183 1.61
Water absorption (23°C,24hrs,1mmt) % ISO 62 0.03
Tensile strength MPa ASTM D638 175
Tensile elongation % ASTM D638 2.0
Flexural strength MPa ISO 178 220
Flexural modulus MPa ISO 178 15,000
Flexural strain % ISO 178 2.3
Charpy notched impact strength (23℃) kJ/m² ISO 179/1eA 35
Temperature of deflection under load (1.8MPa) ISO 75-1,2 280
Temperature of deflection under load (0.45MPa) ISO 75-1,2 290
Electric strength (1mmt) kV/mm IEC 60243-1 44
Electric strength (3mmt) kV/mm IEC 60243-1 24
Volume resistivity Ω·cm IEC 60093 9 x 1015
Volume resistivity (Our standard/1mmt) Ω·cm -
Relative permittivity (1kHz) IEC 60250 4.3
Relative permittivity (1MHz) IEC 60250 3.8
Dielectric dissipation factor (1kHz) IEC 60250 0.02
Dielectric dissipation factor (1MHz) IEC 60250 0.03
Tracking resistance (CTI) V IEC 60112 125
Arc resistance s ASTM D495 130
Mold Shrinkage (80×80×1mmt, Flow direction, Inj. pressure 60MPa) % Our standard 0.02
Mold Shrinkage (80×80×1mmt, Transverse direction, Inj. pressure60MPa) % Our standard 0.54
Mold Shrinkage (80×80×1mmt, Flow direction, Inj. pressure79MPa) % Our standard -
Mold Shrinkage (80×80×1mmt, Transverse direction, Inj pressure 79MPa) % Our standard -
Rockwell hardness M(Scale) ISO2039-2 80
Flammability   UL94 V-0
The yellow card File No.     E106764 *2
Appropriate List number of Ministerial Ordinance for Export Trade Control     Item 16 of Appendix -1

If item's description doesn't include test condition, the item is examined at 23 deg. C. (RT)
Details of each property item, test conditions, please see here

*2) Some of the data described on Yellow Card are limited to specific conditions (color, thickness etc.). Please carefully view the detailed descriptions on the Card.

Data of detailed properties

Moldability  Mold Shrinkage  To view the data  
Short-term mechanical properties  Flexural Properties  To view the data  
Short-term mechanical properties  Effect of Temperature on Maximum Stress  To view the data  
Short-term mechanical properties  Effect of Temperature on Modulus  To view the data  
Thermal properties  Coefficient of Linear Thermal Expansion  To view the data  

All figures in the table are the typical values of the material and not the minimum values of the material specifications.
All data shown here are not always applicable to parts used under different conditions. We do not guarantee that these data are directly applicable to the application conditions of users and we ask each user to make his own decision on the application.
For safe handling of materials we supply, it is advised to refer to the Material Safety Data Sheet “SDS” of the proper material.
This brochure is edited based on reference literatures, information and data currently available to us. So the contents of this brochure are subject to change without notice due to new data.