Item		Unit	Test Method	High Sliding
				SW-01
				High Sliding
	Color No.			CF2001/CD3501
	ISO Marking Code		ISO11469 (JIS K6999)	>POM+PE-KD10<
	Density	g/cm³	ISO 1183	1.42
	Water absorption (23°C,24hrs,1mmt)	%	ISO 62	0.6
	MFR (190℃, 2160g)	g/10min	ISO 1133	7
	MVR (190℃, 2.16kg)	cm³/10min	ISO 1133	6
	Tensile strength	MPa	ISO 527-1,2	50
	Strain at break	%	ISO 527-1,2	20 *1
	Tensile modulus	MPa	ISO 527-1,2	2,700
	Flexural strength	MPa	ISO 178	75
	Flexural modulus	MPa	ISO 178	2,500
	Charpy notched impact strength (23℃)	kJ/m²	ISO 179/1eA	5.4
	Temperature of deflection under load (1.8MPa)	℃	ISO 75-1,2	80
	Coefficient of linear thermal expansion (23 - 55℃、Flow direction)	x10-5/℃	Our standard	11
	Coefficient of linear thermal expansion (23 - 55℃、Transverse direction)	x10-5/℃	Our standard	11
	Electric strength (3mmt)	kV/mm	IEC 60243-1	18
	Volume resistivity	Ω·cm	IEC 60093	2 x 1014
	Surface resistivity	Ω	IEC 60093	-
	Volume resistivity (Our standard)	Ω·cm		-
	Surface resistivity (Our standard)	Ω		-
	Mold Shrinkage (60×60×2mmt, Flow direction, Cavity Pressure 60 MPa)	%	ISO 294-4	2.4
	Mold Shrinkage (60×60×2mmt, Transverse direction, Cavity Pressure 60 MPa)	%	ISO 294-4	2.2
	Rockwell hardness	M(Scale)	ISO2039-2	70
	Specific wear amount (Thrust, vs C-Steel, material side, pressure 0.49MPa, 30cm/s)	x10-3mm³/(N·km)	JIS K7218	-
	Specific wear amount (Thrust, vs C-Steel, steel side, pressure 0.49MPa, 30cm/s)	x10-3mm³/(N·km)	JIS K7218	-
	Coefficient of Dynamic Friction (Thrust, vs C-Steel, pressure 0.49MPa, 30cm/s)		JIS K7218	-
	Specific wear amount (Thrust, vs C-Steel, material side, pressure 0.98MPa, 30cm/s)	x10-3mm³/(N·km)	JIS K7218	0.16
	Specific wear amount (Thrust, vs C-Steel, steel side, pressure 0.98MPa, 30cm/s)	x10-3mm³/(N·km)	JIS K7218	< 0.01
	Coefficient of Dynamic Friction (Thrust, vs C-Steel, pressure 0.98MPa, 30cm/s)		JIS K7218	0.14
	Specific wear amount (Thrust, vs M90-44, material side, pressure 0.06MPa, 15cm/s)	x10-3mm³/(N·km)	JIS K7218	4.0
	Specific wear amount (Thrust, vs M90-44, M90-44 side, pressure 0.06MPa, 15cm/s)	x10-3mm³/(N·km)	JIS K7218	5.0
	Coefficient of Dynamic Friction (Thrust, vs M90-44, pressure0.06MPa, 15cm/s)		JIS K7218	0.21
	Flammability		UL94	HB
	The yellow card File No.			E45034 *2
	Appropriate List number of Ministerial Ordinance for Export Trade Control			Item 16 of Appendix -1

If item's description doesn't include test condition, the item is examined at 23 deg. C. (RT)
Details of each property item, test conditions, please see here

*1) Nominal strain at break
*2) Some of the data described on Yellow Card are limited to specific conditions (color, thickness etc.). Please carefully view the detailed descriptions on the Card.

Data of detailed properties

Moldability	Mold Shrinkage	To view the data
Short-term mechanical properties	Tensile properties	To view the data
Short-term mechanical properties	Flexural Properties	To view the data
Short-term mechanical properties	Effect of Temperature on Maximum Stress	To view the data
Short-term mechanical properties	Effect of Temperature on Modulus	To view the data
Thermal properties	Coefficient of Linear Thermal Expansion	To view the data

All figures in the table are the typical values of the material and not the minimum values of the material specifications.
All data shown here are not always applicable to parts used under different conditions. We do not guarantee that these data are directly applicable to the application conditions of users and we ask each user to make his own decision on the application.
For safe handling of materials we supply, it is advised to refer to the Material Safety Data Sheet “SDS” of the proper material.
This brochure is edited based on reference literatures, information and data currently available to us. So the contents of this brochure are subject to change without notice due to new data.