Item		Unit	Test Method	Special
				6155T7
				High Impact, Low Anisotropy
	Color No.			HD9100
	ISO Marking Code		ISO11469 (JIS K6999)	>PPS-I-(GF+MD)55<
	Density	g/cm³	ISO 1183	1.74
	Water absorption (23°C,24hrs,1mmt)	%	ISO 62	-
	Melt viscosity (310℃、1,000/sec)	Pa·s	ISO 11443	290
	Tensile strength	MPa	ISO 527-1,2	145
	Strain at break	%	ISO 527-1,2	1.8
	Flexural strength	MPa	ISO 178	215
	Flexural modulus	MPa	ISO 178	13,500
	Charpy notched impact strength (23℃)	kJ/m²	ISO 179/1eA	11
	Temperature of deflection under load (1.8MPa)	℃	ISO 75-1,2	270
	Coefficient of linear thermal expansion (Normal temperature, Flow direction)	x10-5/℃	Our standard	-
	Coefficient of linear thermal expansion (Normal temperature, Transverse direction)	x10-5/℃	Our standard	-
	Electric strength (3mmt)	kV/mm	IEC 60243-1	-
	Volume resistivity	Ω·cm	IEC 60093	-
	Volume resistivity (Our standard)	Ω·cm		-
	Flammability		UL94	-
	The yellow card File No.			-
	Appropriate List number of Ministerial Ordinance for Export Trade Control			Item 16 of Appendix -1

If item's description doesn't include test condition, the item is examined at 23 deg. C. (RT)
Details of each property item, test conditions, please see here

All figures in the table are the typical values of the material and not the minimum values of the material specifications.
All data shown here are not always applicable to parts used under different conditions. We do not guarantee that these data are directly applicable to the application conditions of users and we ask each user to make his own decision on the application.
For safe handling of materials we supply, it is advised to refer to the Material Safety Data Sheet “SDS” of the proper material.
This brochure is edited based on reference literatures, information and data currently available to us. So the contents of this brochure are subject to change without notice due to new data.