Home  > Technical Support > Molding Technology

Molding Technology for FR-PET® GF-PET

Contents Introduction Molding characteristics Product design Mold design Molding conditions


Contents


     2.1  Flow characteristics
     2.2  Weldline strength
     2.3  Anisotropy in properties
     3.1  Radiusing corners
     3.2  Metal insert
     3.3  Draft
     3.4  Warpage
     3.5  Sinkmark
     3.6  Self-tapping
     4.1  Molding shrinkage
     4.3  Mold material
     5.1  Predrying
     5.2  Thermal decomposition
     5.3  Use of regrinds