HOME > Technical Support > Design Calculation Tool

Heat analysis tool

Please input parameter

1 Material
2 Heat generation rate
(5~50×106W/m3)

×106W/m3
3 Plastic plate thickness
(1.0 or 3.0mm)

mm
Result
Maximum heating element
temperature after 500 sec
---
Tmax
T1
T2
Tmin
[℃]

[Analysis assumptions]
Ambient temperature: 20 ℃ (Heat transfer coefficient 20 W/(m2k))
Heat conductivity of heating element: 340 W/(m K)
This tool will show temperature after 500 sec based on the heat analysis results by the Finite Element Method

Contact Us

For customers who desire a specific examination of the above, please proceed from here.